Washing comes first
Every exterior begins with a pressure wash at a setting gentle enough for stucco and wood. The goal is to remove chalked paint, dust, cobwebs and the gray film that builds up near busy streets. Paint applied over chalk peels, no matter how good the product is.
We let the house dry fully before any repair work starts. Stucco holds water longer than it looks like it should, and coating damp stucco traps moisture behind the film.
Repairs before color
Stucco cracks get opened slightly, filled with an elastomeric patch and textured to blend with the surrounding wall. Wood fascia and rafter tails get probed with a screwdriver. Soft spots are cut out and replaced, not painted over, because a coat of paint will not hold rotten wood together for more than a season.
Window and door trim is caulked where the old caulk has pulled away. Gaps around hose bibs, light fixtures and vents get sealed so water does not find its way behind the stucco during the winter rains.
Primer where it earns its place
Not every exterior needs a full prime coat. Bare wood, new stucco patches, rust spots on metal railings and any surface going from a dark color to a light one do. Sound, previously painted stucco in good shape often does not. We would rather spend the time on repairs than prime walls that do not need it.
Working around the wind
Orange County weather is easy on painters most of the year, with one major exception. Santa Ana winds usually blow between October and March, pushing warm, very dry desert air down toward the coast. Those days bring some of the lowest humidity of the year, and they are hard on fresh paint.
On a Santa Ana day, paint can skin over on a hot wall before the roller marks have time to level out, and blowing dust sticks to anything still tacky. When the forecast calls for one, we shift the crew to prep, interior work or shaded sides of the house and come back to the exposed walls once the wind drops.
Color and finish outside
Most stucco bodies look best in a flat or low sheen finish, which hides surface texture and patch work. Trim, fascia and doors look sharper in satin or semi-gloss. Fixed colors matter too: the roof tile, any stone veneer, the driveway and the neighbor's house all sit next to your new color, so we test samples on the actual wall and look at them in morning and late afternoon light.
Protecting the yard
Plants along the foundation get tied back or covered with breathable cloth. Windows, light fixtures and the roof edge are masked. Walkways and the driveway get covered before any spraying starts, and we check the neighbor's cars on windy afternoons. At the end of each day, ladders come down and gates get latched so pets stay where they belong.
When the last coat is on
We walk the perimeter with you, mark anything that needs attention, and fix it before we leave. You get labeled cans of each color for future touch-ups, and the property is left swept with the plants untied and the masking gone.
